Roborock F25 Buying Guide 2026: BX, ALT, ACE Pro, Steam and Ultra
Roborock's F25 lineup includes far more than a standard wet-dry vacuum. This 2026 buying guide compares the GT, LT, BX, ALT, ACE, ACE Pro, Steam, Ultra, Ultra Steam Gen 2, Pro Turbo and Combo models. Explore their differences in suction, battery life, detergent dispensing, steam cleaning, stain treatment and accessories to find the right configuration for your home and budget.

Roborock's F25 lineup now covers much more than a standard cordless wet-dry vacuum. The U.S. range includes budget GT and BX models, longer-running LT configurations, smart-cleaning ACE models, the foam-spraying ACE Pro, dedicated steam cleaners, the dual-temperature Ultra, the second-generation Ultra Steam Gen 2, the scrub-focused Pro Turbo, and Combo models with a detachable dry vacuum.
These machines share a family name, but they do not form a straightforward upgrade ladder. Some are designed for routine hard-floor cleaning; others add automatic detergent dispensing, steam, heated water, targeted foam treatment, or a separate handheld vacuum. Even models with similar names can have different tanks, batteries, accessories, and retailer-specific configurations.
There is now enough independent testing to look beyond Roborock's specifications. VacuumChef has published laboratory measurements of the ACE Pro, Business Insider has tested F25-family machines as part of a 30-vacuum comparison, Yahoo Shopping has published cleaning scores, and outlets including cybershack and the Good Housekeeping Institute UK have reviewed individual models.
The results are useful because headline specifications do not always predict cleaning performance. VacuumChef, for example, measured above-average airflow but below-average in-use pressure at the floor on the ACE Pro. Business Insider also recorded substantially less runtime in Auto mode than the advertised Eco figure. Those differences matter more than a model number or a single suction rating.
Quick Verdict: The Best Roborock F25 Models
For most households, the F25 ALT is the most balanced choice. It combines 20,000 Pa advertised suction, automatic detergent dispensing, and SlideTech 2.0 powered assistance. Its observed official-store price is $299.99, compared with a $499.99 list price.
The other models make sense for more specific needs:
Category | Recommendation | Why it stands out |
|---|---|---|
Best everyday value | F25 ALT | Automatic detergent dosing and powered assistance at a mid-range price |
Best budget | F25 BX | Named best value in Business Insider's 30-vacuum testing; large Amazon review base |
Best for sticky messes | F25 ACE Pro | JetFoaming, a 1,000 ml clean-water tank, and 25,000 Pa advertised suction |
Best premium steam cleaner | F25 Ultra Steam Gen 2 | VaporFlow 2.0, WaveFlow heated-water cleaning, and SensEdge edge-cleaning arm |
More affordable steam option | F25 Steam | Adds steam cleaning without the full Ultra feature set |
Best for multiple cleaning tasks | F25 Combo | Combines wet-dry floor cleaning with a detachable dry vacuum |
Best for targeted scrubbing | F25 Pro Turbo | HyperScrub increases water delivery, suction, and roller speed on demand |
The F25 ACE Pro is worth considering at its observed promotional price of $394.99, but its foam system is not a universal solution for stubborn stains. In cybershack's testing, steam performed better on ingrained marks.
For a first shortlist, compare the BX, ALT, and ACE Pro. Move up to the Steam or Ultra models only if high-temperature cleaning is something you expect to use regularly.
One specification distinction is especially important: suction pressure, airflow, roller-washing temperature, steam temperature, and hot-air drying temperature describe different things. A vacuum advertised at 25,000 Pa is not automatically a better floor cleaner than one rated at 20,000 Pa. The measurements discussed below show why.
The Roborock F25 Lineup at a Glance
Roborock's U.S. catalog has expanded considerably since the original F25 launch. The family now includes standard wet-dry cleaners, smart-cleaning variants, foam and steam models, and machines that add dry vacuuming.
Main F25 product families
Product family | Main purpose | Key distinction |
|---|---|---|
F25 GT / GT Gen 2 | Everyday wet-dry cleaning | More affordable configurations |
F25 LT | Longer cleaning sessions | Up to 60 minutes of advertised Eco runtime |
F25 / F25 BX | Standard wet-dry cleaning | Different retail and feature configurations |
F25 ALT | Everyday cleaning with added convenience | Automatic detergent dispensing |
F25 ACE / XT | More advanced cleaning | DirTect, detergent dispensing, and SlideTech 2.0 on applicable versions |
F25 ACE Pro | Targeted stain treatment | JetFoaming |
F25 Steam | Steam-assisted cleaning | VaporFlow steam |
F25 Ultra | Multi-temperature cleaning | Steam, heated water, and automatic detergent dispensing |
F25 Ultra Steam Gen 2 | Premium steam cleaning | VaporFlow 2.0, WaveFlow, and SensEdge |
F25 Pro Turbo | Targeted deep scrubbing | HyperScrub |
F25 Combo / ACE Combo | Wet-dry and dry vacuuming | Detachable handheld vacuum configuration |
Which F25 models are listed for the U.S.?
A model appearing in Roborock's U.S. catalog or support system does not necessarily mean every configuration is currently available from every U.S. retailer. Some are supported models, while others are tied to specific retail channels.
Model | U.S. catalog or support status | Buying consideration |
|---|---|---|
F25 GT | Listed | Current U.S. listing |
F25 GT Gen 2 | Listed | Current U.S. listing |
F25 LT | Listed | Current U.S. listing |
F25 | Listed / supported | Check the exact configuration |
F25 BX | Listed | Current U.S. listing |
F25 ALT | Listed | Current U.S. listing |
F25 ACE | Supported | Confirm the exact SKU |
F25 XT | Listed | Current U.S. listing |
F25 RT | Supported | Check the manual and hardware details |
F25 RT Select | Comparison-page listing | Target-specific configuration |
F25 ACE Pro | Listed | Current U.S. listing |
F25 Steam | Listed | Current U.S. listing |
F25 Ultra | Listed | Current U.S. listing |
F25 Ultra Steam Gen 2 | Listed | U.S. launch October 8, 2026 |
F25 Pro Turbo | Listed | Current U.S. listing |
F25 Combo | Listed | Current U.S. listing |
F25 ACE Combo | Listed | Current U.S. listing |
F25 Pure | Not established | Do not assume U.S. availability |
Two naming issues deserve attention before ordering.
First, Roborock's U.S. support portal recognizes GT Gen 2, RT Gen 2, BX Gen 2, and LT Gen 2. Support recognition alone does not establish that every one of these versions is actively sold in the United States.
Second, some listings and roundup articles use the name "F25 ACE Steam." That is not an established model name. Treat a listing using it as a reason to verify the product number, manual, and warranty before paying.
Do not assume that F25 RT, F25 GT, and their Gen 2 versions share the same hardware. Match the specifications to the exact model number on the product box.
Standard F25 Models: GT, GT Gen 2, LT, BX, ALT, XT, and RT
The standard F25 models are primarily intended for routine hard-floor cleaning. Their differences often have more to do with battery life, water capacity, dirt detection, powered movement, and detergent dispensing than with advertised suction.
F25 GT vs. F25 GT Gen 2
The original F25 GT and the GT Gen 2 are both positioned as affordable wet-dry cleaners with 20,000 Pa advertised suction. They are not identical machines.
The original GT advertises 194°F high-temperature self-washing. The GT Gen 2 has more clearly documented JawScrapers anti-tangle hardware, FlatReach 2.0, and triple-edge cleaning.
Roborock publishes the following specifications for the GT Gen 2:
Specification | F25 GT Gen 2 |
|---|---|
Maximum suction | 20,000 Pa |
Clean-water tank | 870 ml |
Dirty-water tank | 720 ml |
Battery | 2,500 mAh |
Eco runtime | Up to 38 minutes |
Max runtime | Up to 22 minutes |
Downward pressure | 20 N |
Roller speed | 450 RPM |
FlatReach | 180 degrees |
Flat profile | Approximately 4.9 inches |
Dock dimensions | 45.7 × 13.9 × 12.4 inches |
The 38-minute Eco and 22-minute Max figures are manufacturer test results. Actual cleaning time depends on the selected mode, floor conditions, and how often the machine encounters heavier dirt. Business Insider's testing of F25-family machines found that real-world Auto-mode runtime can be substantially shorter than the advertised Eco figure.
The Amazon review samples also tell slightly different stories about the two generations:
Original F25 GT: approximately 4.2 stars across 617 ratings.
F25 GT Gen 2: approximately 4.0 stars across 2,088 ratings.
The newer model has a much larger review sample, but a slightly lower average. That does not establish that the original machine is better. The Good Housekeeping Institute UK selected the original GT as its budget wet-dry cleaner, which makes it worth considering when heavily discounted.
Which should you buy? Choose the GT Gen 2 when the price is similar and you want its documented newer-generation features. Consider the original GT if it is meaningfully cheaper and its specifications match your needs. Do not pay extra for the older model based solely on its high-temperature self-washing claim.
F25 LT: The longer-running standard model
The F25 LT focuses on longer cleaning sessions rather than adding a new cleaning method.
Specification | F25 LT |
|---|---|
Suction power | 20,000 Pa |
Clean-water tank | 870 ml |
Dirty-water tank | 720 ml |
Eco runtime | Up to 60 minutes |
Weight | Approximately 4.2 kg |
Dock dimensions | 330 × 316 × 1,157 mm |
Edge cleaning | Supported |
FlatReach | Supported |
Compared with the GT Gen 2's advertised 38-minute Eco runtime, the LT's 60-minute figure is a meaningful difference on paper. It may be useful in a large open-plan home where stopping to recharge is inconvenient.
That does not automatically make the LT the better purchase. Its value depends on the price difference and whether its longer runtime matters more than the GT Gen 2's newer documented features.
Roborock also says the F25 family uses pouch-cell batteries rated for roughly three times the lifespan of the cylindrical battery packs in its pre-2025 machines. This is a manufacturer claim, not a result confirmed by long-term independent testing of the F25 range.
F25 BX: The best-supported budget choice
The F25 BX is one of the most interesting models in the lineup because its independent testing record is stronger than its price might suggest.
Roborock lists 20,000 Pa suction, a JawScrapers roller, FlatReach 2.0, edge-to-edge cleaning, voice alerts, a screen, and high-temperature self-washing and drying. Its listed weight is approximately 13.67 lb without the dock.
Three independent sources provide useful context:
Business Insider: Its 30-wet-dry-vacuum testing program named the BX its best-value pick at $219.99. Testers measured approximately 34 minutes of runtime in Auto mode, found that it cleaned to within roughly 1 cm of walls, and noted that large debris could become trapped behind the wheels when the machine was pulled backward. The upright locking position does not pause suction.
Yahoo Shopping: The BX scored 4.5/5 on raw egg, 3.5/5 on milk and cereal, 4/5 on steering, 4.5/5 on edge cleaning, and 4/5 on self-cleaning. It was the heaviest machine in that test group at about 14 lb. Testers also noted that the dirty-water tank could splash during emptying.
Amazon: One BX listing has approximately 4.3 stars across 5,088 ratings, the largest review base in the F25 family. A sibling-variant listing shows 4.0 stars across about 2,210 ratings. Amazon ratings can differ between related listings, so these figures should not be treated as one consolidated score.
The BX is not without compromises. Business Insider noted that its body is roughly 3 inches thick, so it cannot slide beneath some cabinet toe kicks. Roborock's official specification lists noise at 75 dB, which is noticeable in a quiet home.
For buyers who want a reasonably priced wet-dry vacuum with meaningful third-party testing behind it, the BX is a strong choice. Its appeal is value, not a more advanced feature set than the ALT or ACE.
F25 ALT: A practical upgrade for everyday cleaning
The F25 ALT adds automatic detergent dispensing and SlideTech 2.0 powered assistance to the standard F25 cleaning approach.
Feature | F25 | F25 ALT |
|---|---|---|
Suction | 20,000 Pa family specification | 20,000 Pa |
DirTect | Yes | Advertised on U.S. listing |
Proactive self-washing | Yes | High-temperature self-washing |
Automatic detergent dispensing | Not listed in comparison | Yes |
SlideTech 2.0 | Not listed | Yes |
Clean-water tank | 870 ml | 740 ml |
Dirty-water tank | 720 ml | 720 ml |
Detergent tank | Not applicable | 100 ml |
Eco runtime | Up to 60 min | Up to 60 min |
Weight | 4.2 kg | 4.7 kg |
The ALT's main advantage is convenience. It automatically doses cleaning solution and uses powered assistance to make the machine easier to move across the floor.
The trade-off is its smaller clean-water tank: 740 ml rather than 870 ml. If you clean a large area in one session, that difference may matter.
At the observed promotional price of $299.99, the ALT is a sensible middle-ground purchase. Choose the standard F25 instead if you prefer the larger tank and do not need automatic detergent dispensing.
F25 XT, F25 ACE, and the RT naming trap
Roborock's official comparison page groups the F25 ACE and F25 XT together. Both are associated with features such as automatic detergent dispensing, SlideTech 2.0, FlatReach, JawScrapers, and high-temperature self-washing.
There are differences in how the features are mapped, however. The official comparison identifies DirTect and proactive self-washing on the ACE. The XT's precise feature set should be checked against its own U.S. product number and manual rather than inferred from the ACE listing.
TechHive covered the XT at $249.99 during Prime Day pricing, compared with a $549.99 list price. That discount makes it worth checking, but it does not automatically make the XT a better buy than the ACE. Compare the actual features and included accessories at checkout.
The F25 RT is recognized in Roborock's U.S. support system. The RT Select also appears on the official comparison page as a Target purchasing option. That establishes a retailer-specific listing, not a complete independent hardware specification.
Before buying an RT or RT Select, check:
The full model number on the box.
The dock and accessories included in the package.
Battery and tank specifications.
The manual linked to that exact SKU.
Whether the seller provides Roborock's U.S. warranty.
F25 ACE vs. ACE Pro: Smart Cleaning or JetFoaming?
The ACE models add more automation to routine wet-dry cleaning. The ACE focuses on dirt detection, detergent dosing, and powered movement. The ACE Pro adds JetFoaming for targeted treatment of sticky and stubborn messes.
Roborock F25 ACE
Specification | F25 ACE |
|---|---|
Clean-water tank | 740 ml |
Dirty-water tank | 720 ml |
Detergent tank | 100 ml |
Eco runtime | Up to 60 minutes |
Weight | 4.7 kg |
Dock dimensions | 352 × 316 × 1,157 mm |
DirTect | Yes |
SlideTech 2.0 | Yes |
Automatic detergent dispensing | Yes |
The ACE's 100 ml detergent reservoir doses cleaning solution automatically during normal cleaning. DirTect monitors dirt levels and adjusts cleaning intensity, which is useful when some areas of a floor are considerably dirtier than others.
It is a good fit for households that want automatic detergent dispensing and assisted movement but do not need steam or a dedicated foam-treatment system.
F25 ACE Pro: What does JetFoaming add?
The ACE Pro is not simply an ACE with a higher suction rating. Its defining feature is JetFoaming, which dispenses cleaning solution as dense foam for targeted treatment of grease, sticky residue, and other difficult marks.
Roborock publishes the following specifications:
Specification | F25 ACE Pro |
|---|---|
Suction power | 25,000 Pa |
Clean-water tank | 1,000 ml |
Dirty-water tank | 720 ml |
Detergent tank | 100 ml |
Battery | 4,000 mAh |
Eco runtime | Up to 60 minutes |
Auto runtime | Up to 40 minutes |
Max runtime | Up to 30 minutes |
Sponge mode | Up to 40 minutes |
FlatReach | 180 degrees |
Flat profile | Approximately 4.9 inches |
Weight | 5.1 kg |
Charging time | Approximately 4 hours |
Self-cleaning | High-temperature |
Drying | Fast and quiet modes |
The 25,000 Pa headline figure is only part of the story. VacuumChef's laboratory measurements found peak airflow of 562 ft/min, well above its approximately 413 ft/min category average. However, in-use pressure at the floor measured 0.94 kPa, below the category average of 1.28 kPa.
That distinction matters. Strong airflow does not necessarily mean the machine maintains stronger pressure against the floor during cleaning.
VacuumChef also noted two usability details: the battery indicator moves in 5-percentage-point increments, and there can be a delay between pressing the foam trigger and the spray starting, followed by some spray overrun.
The independent review from cybershack adds another important qualification. The reviewer gave the ACE Pro 4/5, but found that steam lifted ingrained stains more effectively than detergent foam. Emptying the dirty-water tank twice during a cleaning session also felt excessive, and controlling the machine while it was lying flat through the app was imprecise.
On the positive side, cybershack described the ACE Pro as quiet even at maximum power. A Taiwanese launch-period report described it as noticeably loud at high power. These are conflicting subjective impressions, so noise should be judged by the selected mode and the conditions of use rather than by either report alone.
F25 ACE vs. F25 ACE Pro
Feature | F25 ACE | F25 ACE Pro |
|---|---|---|
Main technology | Smart wet-dry cleaning | JetFoaming |
Advertised suction | 20,000 Pa family configuration | 25,000 Pa |
DirTect | Yes | Smart cleaning functions |
Automatic detergent | Yes | Yes |
Targeted foam | No | Yes |
Clean-water tank | 740 ml | 1,000 ml |
Dirty-water tank | 720 ml | 720 ml |
Detergent tank | 100 ml | 100 ml |
Battery | Not separately confirmed here | 4,000 mAh |
Eco runtime | Up to 60 min | Up to 60 min |
SlideTech | 2.0 | 2.0 |
FlatReach | Supported | FlatReach 2.0 |
Best for | Everyday cleaning | Sticky and stubborn messes |
There is a small specification discrepancy worth noting: one regional press specification sheet lists the ACE Pro's downward pressure at 30 N, while another lists 33 N. Regional F25 specification sheets are not fully harmonized.
At around $394.99, the ACE Pro is attractive if you regularly deal with sticky kitchen spills, food residue, or similar messes. At a much higher price, the decision depends on how often you would actually use JetFoaming.
If ingrained stains are your main concern, consider the F25 Steam as well. The independent steam-versus-foam result from cybershack gives the steam models a stronger case for that particular job.
F25 Steam: What the Temperature Numbers Really Mean
The F25 Steam is designed for buyers who want steam cleaning rather than relying only on water, detergent, and roller agitation.
Specification | F25 Steam |
|---|---|
Suction power | 25,000 Pa |
Steam temperature at internal heater | 356°F |
Steam temperature at outlet | Approximately 210°F |
Estimated temperature at floor | Below 158°F |
Clean-water tank | 1,000 ml |
Downward cleaning pressure | 33 N |
Roller speed | 450 RPM |
Eco runtime | Up to 80 minutes |
Steam self-cleaning | Yes |
High-temperature self-washing | Yes |
Hot-air drying | Up to 203°F |
FlatReach | 180-degree FlatReach 2.0 |
Dock dimensions | 12.44 × 13.90 × 45.51 inches |
The three steam temperatures are not interchangeable. Roborock specifies 356°F at the internal heater, approximately 210°F at the steam outlet, and a floor-surface temperature below 158°F under its stated test conditions.
In other words, the floor is not being exposed to 356°F steam. That distinction is important when assessing floor compatibility and comparing steam-cleaning claims between brands.
The F25 Steam offers steam, Auto, Eco, and Sponge modes. It also advertises blue-light illumination to help make fine debris more visible, followed by steam and heated self-cleaning and a drying cycle.
Can the F25 Steam clean hardwood floors?
Roborock publishes a TÜV SÜD report showing no swelling, warping, or cracking after a simulated five-year cleaning test on solid wood flooring using its tested steam mode.
That is useful evidence, but it should not be interpreted as approval for every wooden floor. The test does not establish compatibility with all finishes, installation methods, damaged surfaces, adhesives, or flooring warranties.
The distinction between sealed solid hardwood, engineered wood, and laminate matters. Follow the flooring manufacturer's cleaning instructions, even if a vacuum manufacturer advertises successful wood-floor testing.
There is also a reliability report worth keeping in perspective. One one-star Amazon review of the F25 Steam described tank leakage and battery failure shortly after the one-year mark, followed by an offer of paid repair rather than warranty coverage. A single review cannot establish a product-wide failure rate, but it highlights the importance of understanding the warranty period before buying.
F25 Ultra vs. Ultra Steam Gen 2
The Ultra models sit at the premium end of the F25 range. They combine steam with heated-water cleaning and automatic detergent dispensing, giving buyers more options for different kinds of floor messes.
Roborock F25 Ultra
Specification | F25 Ultra |
|---|---|
Suction power | 22,000 Pa |
Steam heater temperature | 356°F |
Hot-water cleaning temperature | 187°F |
Steam self-cleaning temperature | 356°F at heater |
Hot-water self-cleaning | 194°F |
Hot-air drying | 203°F |
Automatic detergent dispenser | Yes |
DirTect | Yes |
SlideTech 2.0 | Yes |
FlatReach 2.0 | Yes |
Cleaning modes | Auto, Sponge, Steam, Hot Water |
Roller | JawScrapers |
The four temperature figures describe different parts of the cleaning process:
Temperature | What it measures |
|---|---|
356°F | Steam at the internal heater output |
187°F | Hot-water floor-cleaning system |
194°F | Hot-water self-cleaning process |
203°F | Hot-air drying temperature |
None of these numbers represents the temperature of the floor surface.
Business Insider's F25 Ultra tester offered one of the strongest positive comments in the F25 review record, saying the floors had never looked so shiny after cleaning. That is a useful independent impression, although it should not be treated as a universal result for every floor type.
F25 Ultra Steam Gen 2: What changed?
The F25 Ultra Steam Gen 2 launched in the United States on October 8, 2026, at $699.99, according to TechHive.
The upgrades over the original Ultra are substantial enough to justify treating it as a distinct generation rather than a cosmetic refresh.
Feature | F25 Ultra | Ultra Steam Gen 2 |
|---|---|---|
Steam output | 2,000 mg/min | 5,000 mg/min |
Hot-water cleaning | 187°F | 194°F |
Suction | 22,000 Pa | 25,000 Pa |
Downward pressure | 33 N | 33 N |
Turbo Steam Mode | Not listed | Yes |
SensEdge robotic arm | Not listed | Yes |
Steam-mode runtime | Model-specific | Up to 30 minutes |
Maximum advertised runtime | Model-specific | Up to 100 minutes |
Advertised cleaning coverage | Model-specific | Up to 8,396 sq ft |
Drying | Hot air | 5-minute fast / 30-minute quiet at 45 dB |
Roborock specifies that the 5,000 mg/min steam output is measured at the nozzle after Turbo Steam Mode reaches a steady state. The 356°F temperature remains a heater-output measurement, not a floor-temperature reading. Steam preparation is advertised as taking as little as 30 seconds under specified warm-start conditions.
The other major addition is SensEdge, Roborock's adaptive edge-cleaning arm.
A conventional roller has a fixed physical width. Even when it gets close to a wall, a narrow strip of floor can remain untouched. SensEdge uses an adaptive robotic arm that lifts and pushes to reduce debris being moved forward, reacts in approximately 0.18 seconds, extends to reach three edges, and adjusts to reduce residual water along floor seams. Roborock describes the result as 0 mm triple-edge cleaning.
That 0 mm claim needs context. Independent testers measuring edge performance on flagship F25 models reported residual gaps of approximately 5–6 mm. One measured 6 mm on the F25 Ultra; another recorded 5 mm on a sibling flagship. A millimeter of difference is ordinary measurement variation, but both results are above the advertised zero-gap figure.
The Gen 2's active arm is designed to reduce that remaining gap. However, no published independent measurement of the Gen 2's actual edge gap was available as of this guide's update.
The early independent rankings are encouraging. Habilytics scored the Ultra Steam Gen 2 at 87/100 and ranked it first among 2026 wet-dry vacuums. smartshopping.guide also named it Best Overall steam vacuum of 2026, while EFTM published early first-impressions coverage around the October launch.
These results make the Gen 2 the most comprehensively equipped F25 model, but its price is high. For a large home with frequent kitchen messes and a strong preference for steam and heated-water cleaning, the extra features may be worthwhile. In a small apartment, the original Ultra or an ACE-series machine may be a more sensible use of the budget.
F25 Pro Turbo: What Does HyperScrub Do?
The F25 Pro Turbo takes a different approach from the ACE Pro and Ultra. Its defining feature is HyperScrub, a user-activated deep-cleaning mode that increases water delivery, suction performance, and roller speed while the trigger is held.
Roborock advertises the following improvements against its own comparison baseline:
Metric | Advertised improvement |
|---|---|
Water delivery | +245% |
Scrubbing density | +24% |
Suction performance | +36% |
Its published specifications include:
Specification | F25 Pro Turbo |
|---|---|
Suction power | 25,000 Pa |
Roller speed | 550 RPM |
HyperScrub | Yes |
JawScrapers | Yes |
Edge cleaning | 0 mm advertised |
SlideTech 2.0 | Yes |
FlatReach 2.0 | Yes |
Lay-flat angle | 180 degrees |
Self-cleaning | High-temperature |
Drying | Hot air |
App control | Yes |
Voice alerts | Yes |
Listed warranty | 1-year limited warranty |
The Pro Turbo has one important limitation in the current evidence base: no independent review voice was found in 2026 coverage. There are no published lab measurements or tested-roundup scores comparable to those available for the BX or ACE Pro.
The +245% water-delivery figure is a manufacturer comparison, not an independent measurement. Roborock also advertises a TÜV SÜD solid-wood test showing no swelling, warping, or cracking after a 60-minute deep-scrubbing test. That is a specific manufacturer-reported result, not proof of compatibility with every wood floor.
The premium F25 technologies address different cleaning problems:
JetFoaming: concentrated foam treatment for sticky residue and targeted stains.
VaporFlow steam: high-temperature cleaning for compatible floors.
WaveFlow heated water: heated-water floor cleaning.
HyperScrub: increased mechanical scrubbing intensity.
Choose the Pro Turbo if dried-on spills are common and you prefer mechanical scrubbing. Choose the ACE Pro if you specifically want foam treatment. Choose a Steam or Ultra model if high-temperature cleaning is the priority. For ingrained stains, remember that cybershack's independent test favored steam over foam.
F25 Combo and ACE Combo: A Wet-Dry Cleaner Plus a Handheld Vacuum
The F25 Combo models are different from the rest of the family because they add a detachable cordless dry-vacuum system.
The advertised functions include wet-dry hard-floor cleaning, cordless stick vacuuming, handheld cleaning, upholstery and mattress cleaning with a motorized mini brush, and crevice cleaning.
The package includes the wet-dry body, handheld configuration, multi-surface brush, motorized mini brush, 2-in-1 cleaning head, charging and drying dock, storage stand, maintenance brush, cleaning solution, and filter.
Specification | F25 Combo | F25 ACE Combo |
|---|---|---|
Wet-dry suction | 20,000 Pa | 20,000 Pa |
Dry stick vacuum suction | 25,000 Pa | 25,000 Pa |
Wet-dry Eco runtime | Up to 60 min | Up to 60 min |
Dry stick Eco runtime | Up to 65 min | Up to 65 min |
Clean-water tank | 870 ml | 740 ml |
Dirty-water tank | 720 ml | 720 ml |
Detachable dry-vacuum system | Yes | Yes |
Motorized mini brush | Included | Included |
2-in-1 cleaning head | Included | Included |
App control | Not listed as ACE-level functionality | Yes |
JawScrapers anti-tangle | Model-specific | Advertised |
Dock dimensions | 13.9 × 12.4 × 45.6 in | 13.9 × 12.4 × 45.6 in |
Roborock lists noise of up to 73 dB(A) in Eco mode for the Combo series. That is lower than the BX's official 75 dB figure, but it is still audible during use.
For households without a cordless stick vacuum, a Combo model can cover stairs, sofas, upholstery, mattresses, car interiors, and dry debris on carpets. The wet-dry floor head itself is still intended primarily for hard floors. The detachable dry-vacuum system is not a carpet-washing attachment.
The decision comes down to what you already own. If you have a good cordless stick vacuum, paying extra for the Combo configuration may not make sense. If you want to replace both a mop-style cleaner and a basic cordless vacuum, the $384.99 observed promotional price makes the Combo more appealing.
Real-World Battery Life and Noise: Advertised vs. Measured
Battery figures are among the easiest F25 specifications to misinterpret. Roborock's advertised runtime usually refers to Eco mode, while real cleaning often involves Auto, Max, steam, or other higher-intensity settings.
The independent measurements provide a more useful reference:
Claim or specification | Independent finding | Source |
|---|---|---|
Up to 60 minutes of Eco runtime | About 34 minutes in Auto mode on the BX | Business Insider |
0 mm edge cleaning | Approximately 5–6 mm residual gap on flagship models | Two independent testers |
Quiet operation | BX official specification lists 75 dB; cybershack called ACE Pro quiet even at Max | Official specification / cybershack |
Approximately 4-hour charging time | Reported as a real usage limitation | VacuumChef |
Battery percentage display | Reported in 5% increments | VacuumChef |
A 60-minute Eco claim should not be used as a prediction for every cleaning session. The BX's approximately 34-minute Auto-mode result illustrates the difference. The Ultra Steam Gen 2's advertised maximum runtime of up to 100 minutes is also tied to Auto mode with ECO suction; its Steam mode is rated for up to 30 minutes.
One ownership detail is less obvious than runtime. An owner comparison reports that F25 machines must be fully charged before self-cleaning can run. During the self-clean and drying cycle, the machine pauses charging and operates on battery. The Dreame H14 Pro, by comparison, was reported to perform these functions while plugged in.
If you normally dock the machine and trigger self-cleaning before leaving home, this difference may affect your routine.
Roborock F25 Reliability: Ratings and Common Complaints
The F25 family now has a substantial enough review base to identify recurring owner concerns, although review themes should not be confused with verified failure rates.
Amazon ratings by model
Model | Average rating | Approximate ratings |
|---|---|---|
F25 BX | 4.3 stars | 5,088 |
F25 BX variant | 4.0 stars | 2,210 |
F25 GT | 4.2 stars | 617 |
F25 GT Gen 2 | 4.0 stars | 2,088 |
The BX's 4.3-star average across more than 5,000 ratings is the strongest large-sample customer-rating record in the family. That is consistent with Business Insider's positive value verdict, although customer ratings and controlled cleaning tests measure different things.
Common owner complaints
Several themes recur in owner discussions and review analyses:
No solid-liquid separation in the dirty-water tank. Hair and solid debris need to be removed manually or rinsed away. This is one of the most noticeable daily differences between the F25 and models with a dedicated debris-separation basket.
Moldy filters when drying is skipped. The hot-air drying cycle is intended to reduce moisture and odor. Owners who shorten or skip drying report mildew smells developing over time.
Charging-port corrosion reports. A minority of owners describe corrosion, often in connection with damp storage conditions. Keep the charging contacts and surrounding area clean and dry.
Mixed durability feedback. Roughly half of durability-related mentions in one review-theme analysis were negative, often describing machines that worked well for about six months before problems appeared. That pattern deserves attention, but it does not establish a failure rate for the entire range.
Streaking. One review-theme analysis found roughly 45 positive and 40 negative mentions related to streaking. Floor type, cleaning technique, detergent quantity, and roller condition can all affect the result.
The one-year warranty boundary. One F25 Steam owner reported tank leaks and battery failure shortly after the first year, followed by a paid-repair offer. That is an individual report, but it illustrates why warranty timing matters.
How to troubleshoot streaks
Before assuming the machine is faulty, check the following:
Inspect the roller for dirt, hair, or residue.
Empty the dirty-water tank if it is full.
Check the scraper for obstructions or buildup.
Reduce the amount of cleaning solution if you may be using too much.
Confirm that the floor is suitable for wet cleaning.
Replace a worn roller when necessary.
Excess detergent is a common cause of residue. Adding more cleaning solution does not necessarily improve cleaning performance.
Maintenance, Floor Compatibility, Warranty, and Running Costs
Self-cleaning reduces some of the work, but it does not eliminate routine maintenance. The dirty-water tank, filter, roller ends, scraper, and dock still need attention.
What needs manual cleaning?
Component | Recommended action |
|---|---|
Dirty-water tank | Empty after every cleaning session |
Solid-liquid separator | Remove and rinse accumulated debris |
Roller | Inspect for hair and residue |
Roller cover | Remove and clean when needed |
Filter | Clean and dry according to the manual |
Clean-water tank | Refill and inspect periodically |
Detergent reservoir | Refill with compatible cleaning solution |
Dock | Wipe away residue and standing water |
Charging contacts | Keep clean and dry |
The most important habit is to avoid leaving dirty water sitting in the tank. Empty it after each session, then allow the filter and roller to dry as instructed. This helps reduce odor and the risk of mildew.
Does the self-cleaning cycle eliminate roller maintenance? No. The machine uses water, roller rotation, and, on selected models, steam or high-temperature washing. Roller ends, scraper edges, separator components, and filter surfaces still need periodic inspection.
Which floors can the F25 clean?
Floor compatibility depends on both the floor material and its finish. Steam and heated-water modes require more caution than ordinary damp cleaning.
Floor type | Standard wet-dry cleaning | Steam / high-temperature cleaning |
|---|---|---|
Sealed hardwood | Generally suitable if the flooring manufacturer permits damp cleaning | Check the flooring warranty and model guidance |
Unsealed hardwood | Avoid | Avoid |
Engineered wood | Depends on finish and installation | Use caution; obtain manufacturer approval |
Laminate | Only if explicitly approved for wet cleaning | Generally avoid unless explicitly approved |
LVP | Follow the manufacturer's wet-cleaning limits | Do not assume steam is safe |
Vinyl | Usually suitable on compatible sealed surfaces | Check adhesive and manufacturer restrictions |
Ceramic tile | Generally suitable | Usually a more suitable steam candidate |
Porcelain tile | Generally suitable | Usually a more suitable steam candidate |
Natural stone | Check stone and sealant compatibility | Follow the stone manufacturer's guidance |
Marble | Use pH-appropriate cleaning products | Check sealant and surface compatibility |
Concrete | Depends on sealant and coating | Check coating compatibility |
Rugs and carpets | Not intended for the wet-dry floor head | Not intended for steam floor washing |
Three points deserve particular attention:
Unsealed wood and moisture-sensitive flooring should not be treated like ceramic tile.
Laminate can be damaged when moisture enters the joints.
Roborock's solid-wood test does not establish compatibility with every engineered floor, laminate surface, adhesive, finish, or coating.
Even when Roborock publishes successful wood-floor testing, the flooring manufacturer's instructions take priority.
The standard F25 wet-dry head is designed for hard floors, not carpet washing. Among the competitors discussed in this guide, the Narwal S20 Pro is the tested model that also handles low-pile rugs. That is a meaningful capability difference if rugs are part of your regular cleaning routine.
Warranty, cleaning solution, and ongoing costs
Roborock's U.S. official listings advertise a one-year limited warranty for the F25 family, including the Pro Turbo, and a 30-day return period on applicable purchases.
Before ordering, confirm that:
The seller is Roborock or an authorized U.S. retailer.
The warranty covers the exact model and serial number.
Replacement rollers and filters are available for that configuration.
The product is a U.S. SKU rather than an imported regional version.
Do not assume that a Chinese or European F25 model carries the U.S. warranty. Gray-market listings may use similar model names but have different support arrangements.
Roborock recommends compatible cleaning solutions. The ACE Pro's JetFoaming system is designed around its intended cleaning solution, and ordinary household detergents should not be poured into the machine without checking the manual.
Claims that a refill bottle lasts approximately 30 days depend on cleaning frequency, floor area, and the amount of detergent dispensed. Actual consumption will vary.
Replacement soft rollers and washable filters are available for several F25 configurations. Rather than assigning a universal annual maintenance cost, budget for cleaning solution based on usage and replace rollers and filters when their condition requires it. Buying a model with parts and compatible solution readily available in the United States is the simplest way to avoid unnecessary ownership costs.
Which Roborock F25 Is Best for Your Home?
The best model depends on your floors, cleaning habits, budget, and whether you need features such as steam or a detachable dry vacuum.
Household or use case | Recommended model | Main reason | Biggest limitation |
|---|---|---|---|
Ordinary daily cleaning | F25 ALT | Automatic detergent and powered movement | Smaller clean-water tank |
Budget apartment | F25 BX | Strong independent value results | 75 dB noise; limited toe-kick clearance |
Tightest budget | F25 GT / GT Gen 2 | Affordable entry point | Fewer advanced features |
Large open-plan home | Ultra Steam Gen 2 | Up to 100-minute advertised runtime | Premium price |
Pet hair | F25 ACE Pro or BX | JawScrapers and wet-dry pickup | Dirty tank lacks solid separation |
Long human hair | ACE Pro / Ultra Steam Gen 2 | JawScrapers hardware | Anti-tangle performance depends on conditions |
Children and food spills | ACE Pro | Targeted foam treatment | Requires compatible cleaning solution |
Kitchen grease | Ultra Steam Gen 2 | Heated water and steam | Expensive |
Ingrained stains | F25 Steam | Steam outperformed foam in cybershack testing | No detergent automation advertised |
Sealed hardwood | F25 ALT | Conventional wet-dry cleaning | Must follow flooring guidance |
Tile floors | Ultra / Ultra Steam Gen 2 | Multiple cleaning modes | Higher price |
Low furniture | Ultra Steam Gen 2 | FlatReach 2.0 and 4.9-inch profile | Some cabinet toe kicks remain inaccessible |
Less manual roller maintenance | ACE Pro / Ultra Steam Gen 2 | Automated cleaning and drying | Dirty tank still needs attention |
Need a handheld vacuum | F25 Combo | Detachable dry-vacuum system | More accessories to maintain |
Low-pile rugs are part of the job | Look outside the F25 family | Narwal S20 Pro has tested rug capability | F25 wet-dry heads are hard-floor focused |
Roborock F25 Prices and Deals: What Is a Good Buy?
The following prices were observed on Roborock's official U.S. store on November 2, 2026. They are promotional snapshots, not guaranteed everyday prices.
Model | Listed MSRP | Observed sale price |
|---|---|---|
F25 GT | $299.99 | $169.99 |
F25 GT Gen 2 | $299.99 | $169.99 |
F25 LT | $349.99 | $349.99 |
F25 ALT | $499.99 | $299.99 |
F25 XT | $549.99 | $249.99 |
F25 BX | $349.99 | $399.99* |
F25 ACE Pro | $699.99 | $394.99 |
F25 Steam | $599.99 | $379.99 |
F25 Ultra | $699.99 | $469.99 |
F25 Ultra Steam Gen 2 | $799.99 | $699.99 |
F25 Pro Turbo | $549.99 | $449.99 |
F25 Combo / ACE Combo | $649.99 | $384.99 |
*The BX listing's displayed price is higher than its comparison MSRP. This is why it is important to check the actual checkout price rather than relying on the displayed discount or list price. Business Insider cited a meaningful BX market price of $219.99, while Yahoo Shopping recorded a price around $220.
What the price history tells us
The F25 GT has been one of Roborock's most heavily discounted models.
F25 GT historical low: CNET recorded a price of $160 during the June 2026 Prime Day period.
Slickdeals deal history: Prices of $150 on June 26, 2026, and $155 on October 6, 2026, were recorded. One promotion reportedly sold more than 6,000 units in a month.
F25 GT Set price tracker: Historical low of $179.98, high of $329.99, and average of $234.27.
A GT price below approximately $235 is therefore at or below its recorded historical average. The $169.99 snapshot is a particularly attractive entry point.
Three deals stand out in the November 2 snapshot:
F25 GT at $169.99: An inexpensive way into cordless wet-dry cleaning, with a 4.2-star Amazon rating across approximately 617 ratings.
F25 ACE Pro at $394.99: Adds JetFoaming, a 1,000 ml clean-water tank, and 25,000 Pa advertised suction for considerably less than its listed MSRP.
F25 Steam at $379.99: A relatively affordable way to get steam cleaning, particularly appealing if stubborn stains are a regular problem.
The XT's discount also looks substantial, but do not assume that every ACE software feature transfers to the XT. Verify the exact SKU and accessories before buying.
Roborock F25 vs. Tineco, Dreame, Bissell, Shark, Narwal, and Dyson
The wet-dry vacuum market has several strong alternatives. The right comparison is model against model, not Roborock against another brand as a whole.
Main competitors
Competitor | Approximate price | What it does differently |
|---|---|---|
Tineco FLOOR ONE S9 Artist Steam Pro | $699 | 25 kPa suction, ReverseScrub, up to 75-minute Auto / 90-minute Quiet / 30-minute Steam runtime, FlashDry |
Tineco S7 Stretch Steam | Mid-premium | 320°F HyperSteam and up to 75-minute runtime |
Dreame H14 Pro | $339.99 | 18 kPa suction; charges while self-cleaning and drying |
Dreame Aero Pro Steam | Premium | 392°F steam, 28 kPa suction, 3.88-inch body |
Dreame Aero Ultra Steam | Premium | 392°F steam, 194°F hot water, and FoamWash |
Narwal S20 Pro | $360 | Tested option that also cleans low-pile rugs |
Dyson WashG1 | $379.99 | Mechanical floor washer without suction for dry debris |
Bissell CrossWave HydroSteam | $350–399 | Corded cleaning with rug capability and HydroSteam |
Shark HydroVac | $150–330 | Simpler, lower-cost hard-floor cleaning |
One classification issue matters when comparing steam cleaners: the Dreame H15 Pro Heat is often listed alongside steam models, but it heats water in its dock. It is not a true steam cleaner. Do not include it in a steam shortlist based solely on a retailer's category label.
F25 vs. Tineco FLOOR ONE S7
The established F25 and Tineco S7 rivalry comes down to runtime and cleaning options.
Tineco generally has the advantage in advertised runtime. Roborock offers more variety in its premium cleaning methods, including steam and heated-water modes. Published comparisons often treat suction as broadly similar, depending on which F25 model and specification sheet they use.
For buyers who value longer sessions and Tineco's cleaning-sensing system, the S7 deserves a close look. If you want a choice of steam, heated water, foam, and mechanical scrubbing across one product family, Roborock has the wider range.
Ultra Steam Gen 2 vs. Tineco S9 Artist Steam Pro
The Ultra Steam Gen 2 and Tineco S9 Artist Steam Pro are two of the most relevant premium comparisons, both around $699.
The Tineco counters with 25 kPa suction, ReverseScrub, longer advertised Auto and Quiet runtimes of 75 and 90 minutes, and iLoop sensing. Independent commentary credits its sensing system with helping avoid over-wetting and streaking.
Roborock's response is 5,000 mg/min Turbo Steam output, 194°F hot-water cleaning, and the SensEdge robotic arm.
The choice is between Tineco's emphasis on sensing and consistency and Roborock's combination of high steam output, heated water, and adaptive edge cleaning.
F25 vs. Dyson WashG1
These machines are not direct equivalents.
The Dyson WashG1 is a mechanical floor washer without a suction motor. It cannot pick up dry cereal, hair, or other loose debris in the way a wet-dry vacuum can. You need to sweep or vacuum first.
The F25 combines dry-debris pickup and wet cleaning in one pass. If you already own a capable vacuum and only want a dedicated floor washer, the WashG1 may still be suitable. If you want one machine to handle both dry debris and wet spills, the F25 is the more appropriate category.
F25 vs. Dreame H14 Pro
The Dreame H14 Pro is worth considering at approximately $339.99.
An owner-level comparison that circulated widely favored the H14 Pro for its wheels, noise, and ability to charge while self-cleaning and drying. Those are practical advantages if you routinely dock the machine and run its maintenance cycle without planning ahead.
Roborock counters with its broader premium lineup, including JetFoaming and the Ultra steam models, as well as a larger tested review base for some F25 configurations.
Where Roborock has an advantage
Across the F25 range, Roborock offers several features that are useful in specific situations:
FlatReach 2.0: Allows the machine to lie flat for cleaning beneath furniture, although cabinet toe kicks can still block access.
JawScrapers: Designed to reduce hair tangling around the roller.
SlideTech 2.0: Powered movement assistance.
Multiple stain-treatment approaches: JetFoaming, steam, heated water, and HyperScrub.
When another brand makes more sense
Choose Tineco if you find a better price or prefer its iLoop sensing and runtime characteristics.
Choose Dreame if its edge-cleaning design or ability to charge during self-cleaning better fits your routine.
Choose Bissell if you want a corded, rug-capable steam cleaner at a lower price.
Choose Shark if basic hard-floor cleaning and a lower purchase price matter most.
Choose Narwal if low-pile rugs are part of the cleaning job.
Choose Dyson WashG1 if you already have a separate vacuum and want a dedicated mechanical floor washer.
A $170 entry-level F25 should not be judged against a $699 premium model. Compare machines with similar prices and intended uses.
Final Verdict: Which Roborock F25 Should You Buy?
The F25 family makes more sense when viewed as several cleaning approaches sharing a product name, rather than as a simple progression from cheap to expensive.
The shortlist
Buyer | Recommendation | Why |
|---|---|---|
First-time wet-dry vacuum buyer | F25 GT Gen 2 | Affordable with documented newer-generation features |
Best everyday value | F25 ALT | Automatic detergent and powered assistance at $299.99 |
Budget buyer who values testing evidence | F25 BX | Business Insider best-value pick and large Amazon review base |
Pet owners | F25 ACE Pro | JawScrapers and targeted foam treatment |
Kitchen-heavy households | Ultra Steam Gen 2 | Steam, 194°F heated water, and SensEdge |
Ingrained-stain cleaning | F25 Steam | Steam outperformed foam in cybershack's test |
Dried-on spills | F25 Pro Turbo | HyperScrub increases mechanical cleaning intensity |
Replacing two appliances | F25 Combo / ACE Combo | Wet-dry cleaning plus a detachable dry vacuum |
Which upgrades are worth paying for?
Some features offer practical benefits to a wide range of households:
JawScrapers: Worth considering if you regularly clean up pet hair or long hair.
FlatReach 2.0: Useful if you have furniture with enough clearance for the machine's low profile.
Automatic detergent dispensing: Convenient if you clean frequently.
SlideTech 2.0: Helpful if you find heavier floor washers difficult to maneuver.
Heated roller drying: Useful for reducing moisture and odor between cleaning sessions.
Other upgrades are worth paying for only if you have a clear use case:
JetFoaming: Useful for frequent sticky messes, although cybershack found steam more effective on ingrained stains.
HyperScrub: Designed for dried-on spills, but independent testing is still missing.
Steam and heated water: Worth considering for compatible floors and households that regularly need high-temperature cleaning.
SensEdge: A potentially useful improvement for edge coverage, although independent Gen 2 measurements are not yet available.
Combo accessories: Make sense when you genuinely need a second dry vacuum.
Models that deserve extra scrutiny
Model or listing | What to check |
|---|---|
F25 GT | Confirm whether the box contains the original or Gen 2 model |
F25 RT / RT Select | Verify the retailer-specific SKU, dock, and accessories |
F25 XT | Confirm which ACE-related features are actually included |
F25 BX | Look for a price near $220 rather than the anomalous $399.99 store listing |
F25 ACE | Do not pay ACE Pro prices unless you need JetFoaming |
F25 Ultra | Compare it with the Gen 2 before buying; the observed price gap is relatively small |
"F25 ACE Steam" | Not an established model name; verify before ordering |
F25 Pure | U.S. availability has not been established |
The bottom line
If the choice comes down to three models, start here:
F25 BX: Best for budget buyers who want a model with a strong independent value verdict and a large customer-review base.
F25 ALT: Best for everyday convenience, with automatic detergent dispensing and powered assistance at $299.99.
F25 Ultra Steam Gen 2: Best for buyers who specifically want Roborock's most advanced combination of steam, heated water, and edge-cleaning technology.
The biggest mistake is choosing an F25 based on one impressive number. A 25,000 Pa suction rating, 356°F heater temperature, or 0 mm edge-cleaning claim does not tell you exactly how the machine performs on your floor.
VacuumChef's pressure measurements, Business Insider's battery testing, and independent edge-gap measurements all point to the same buying principle: use the specification sheet to narrow the shortlist, then look at how the machine performs in independent tests and how well its features match your home.
Frequently Asked Questions
Which Roborock F25 model is the best?
For most households, the F25 ALT offers a good balance of features and price at the observed $299.99 promotional price. The F25 BX is the stronger budget choice on independent evidence: Business Insider named it best value, and one Amazon listing has approximately 4.3 stars across 5,088 ratings. The Ultra Steam Gen 2 is the premium option, with Habilytics scoring it 87/100 and ranking it first among 2026 wet-dry vacuums.
What is the difference between the F25 GT and F25 LT?
Both are standard wet-dry cleaners with 20,000 Pa advertised suction. The LT advertises up to 60 minutes of Eco runtime, compared with up to 38 minutes for the GT Gen 2. Check the exact GT generation before comparing battery specifications because figures for the original GT and GT Gen 2 can differ.
What is the difference between the F25 and F25 ALT?
The standard F25 emphasizes DirTect dirt detection and proactive self-washing. The ALT adds automatic detergent dispensing and SlideTech 2.0 powered assistance. Roborock's family comparison lists an 870 ml clean-water tank for the F25 and 740 ml for the ALT.
Is the Roborock F25 ACE Pro worth the extra money?
At the observed promotional price of $394.99, it can be a good buy if you regularly clean sticky spills or want JetFoaming. It also has a 1,000 ml clean-water tank and 25,000 Pa advertised suction.
There are two qualifications. VacuumChef measured its in-use floor pressure below the category average despite strong airflow, and cybershack found that steam lifted ingrained stains more effectively than foam. For routine floor maintenance, the ACE or ALT may be sufficient.
What is new in the F25 Ultra Steam Gen 2?
The Gen 2 increases advertised steam output to 5,000 mg/min, raises hot-water cleaning temperature from 187°F to 194°F, and increases suction from 22,000 Pa to 25,000 Pa. It also adds Turbo Steam Mode and the SensEdge robotic arm. The model launched in the U.S. on October 8, 2026, at $699.99.
How long does the Roborock F25 battery really last?
Business Insider measured approximately 34 minutes in Auto mode on the BX, compared with the family's advertised Eco runtime of up to 60 minutes. Advertised Eco runtimes vary by model, from 38 minutes on the GT Gen 2 to up to 100 minutes on the Ultra Steam Gen 2 under its specified Auto/ECO suction conditions.
The Gen 2's Steam mode is rated for up to 30 minutes. Expect higher-intensity cleaning modes to use more battery than Eco mode.
Is the F25's 0 mm edge-cleaning claim accurate?
Independent testers measured residual gaps of approximately 5–6 mm on flagship F25 models. The SensEdge arm on the Ultra Steam Gen 2 is designed to reduce the remaining gap, but no published independent measurement of the Gen 2's actual edge gap was available as of November 2, 2026.
Does the Roborock F25 work on carpet?
The standard wet-dry floor head is designed for hard floors, not carpet washing. The F25 Combo models add a detachable dry vacuum that can clean carpeted surfaces with the appropriate attachment. Among the competitors covered here, the Narwal S20 Pro is the tested model that also handles low-pile rugs.
Can I use the F25 Steam on hardwood floors?
Possibly, if the hardwood is sealed and the flooring manufacturer permits steam cleaning. Roborock's TÜV SÜD report found no swelling, warping, or cracking after a simulated five-year test on solid wood using its tested mode.
That result does not cover every finish, installation method, or flooring warranty. It also does not establish that laminate or engineered wood is safe to steam-clean. Follow the flooring manufacturer's instructions.
What are the most common Roborock F25 problems?
Recurring owner complaints include the lack of solid-liquid separation in the dirty-water tank, moldy filters when drying cycles are skipped, charging-port corrosion reports associated with damp storage, and mixed durability feedback. Streaking is another recurring issue and can be related to roller condition, floor type, or excessive detergent.
These are complaint themes, not verified failure rates. The BX's 4.3-star average across more than 5,000 ratings indicates that many owners are satisfied.
Why does my Roborock F25 leave streaks?
Start by checking the roller, dirty-water tank, scraper, and cleaning-solution quantity. Excess detergent can leave residue, so adding more solution may make streaking worse. Also confirm that your floor is suitable for wet cleaning and replace a worn roller when necessary.
How loud is the Roborock F25?
The F25 BX's official noise specification is 75 dB. The Combo series lists up to 73 dB(A) in Eco mode.
Reviews of the ACE Pro are less consistent. cybershack described it as quiet even at maximum power, while a Taiwanese launch-period report called it noticeably loud at high power. Noise impressions depend on the mode and testing conditions.
What warranty does the Roborock F25 have?
Roborock's U.S. official listings advertise a one-year limited warranty, with a 30-day return period on applicable purchases. Confirm the warranty for the exact model and seller before ordering, particularly if the listing is for an imported regional version.
Does the F25 require Roborock cleaning solution?
Roborock recommends its compatible cleaning solutions, and the ACE Pro's JetFoaming system is designed around them. Do not add ordinary household detergent without checking the manual. Detergent consumption varies with cleaning frequency, floor area, and dispensing settings.
F25 GT vs. GT Gen 2: Which should you buy?
The GT Gen 2 has documented JawScrapers, FlatReach 2.0, and triple-edge cleaning. The original GT has a higher average Amazon rating in the review samples cited here—4.2 stars across 617 ratings versus 4.0 stars across 2,088 for the Gen 2—and was selected as a budget wet-dry cleaner by the Good Housekeeping Institute UK.
If both cost around $170, the GT Gen 2 is the more straightforward choice for its newer documented features. Consider the original GT if it is meaningfully cheaper and its feature set is sufficient.
How does the F25 compare with the Dyson WashG1?
The two machines use different cleaning approaches. The Dyson WashG1 is a mechanical floor washer without a suction motor, so it cannot pick up dry debris in the same way as the F25. You need to vacuum or sweep first.
The F25 combines dry-debris pickup and wet cleaning. The WashG1 may suit a home that already has a separate vacuum and only needs a dedicated floor washer.
Related GuidesMore →

Which Yale Smart Lock Should You Buy? Every Model Compared (2026)
Yale's smart lock lineup includes more than the Assure Lock 2. This 2026 buying guide compares every major U.S. model, including the Assure Lock 2, Touch, Plus, Yale Smart Lock with Matter, Approach and legacy products. Learn how keyed and key-free designs, fingerprint access, Apple Home Key, Wi-Fi, Z-Wave and Matter differ, and which configuration makes sense for your home.

Which Roborock Should You Buy in 2026? Saros, Qrevo, and Q Series Explained
Choosing a Roborock in 2026 means looking beyond advertised suction and comparing navigation, brush design, mop systems, dock features, and real-world test results. This guide covers the Saros, Qrevo, Q, and legacy S8 families, with recommendations for carpet-heavy homes, pet owners, hard floors, low furniture, and tighter budgets. It also examines current U.S. pricing, maintenance costs, warranty terms, app privacy, and the implications of new FCC rules.

Which Ergotron Monitor Arm Should You Buy? LX, LX Pro, HX, and More
Ergotron makes monitor arms for everything from lightweight office displays to large curved gaming monitors, but the models aren't interchangeable. This guide compares the Ergotron LX, LX Pro, HX, MXV, and TRACE to help you choose the right arm for your display. Learn how weight capacity, screen depth, desk-clamp compatibility, adjustment range, and current U.S. pricing affect the decision, with independent testing and owner feedback providing additional context.